To run another load, repeat the Operation Procedure. If the steaming job is complete, turn the water supply valve and power switch to the OFF position.
NOTE: For best results, clothes should be removed as soon as possible after the buzzer sounds. Shake the garment vigorously in quick up and down flapping motion after removal.
NOTE: After every third load lift the aluminum gate and remove any lint from the heating pan. Lint can prevent the float switches from functioning properly, which may result in damage to the machine.
For assistance call:
1-800-359-3467
620-767-5695
Check the heating Pan for cleanliness. Remove any lint or foreign debris.
Turn the water supply valve to the ON position.
Check the Heating Pan water level for approximately 2" depth
Turn the power switch on. The PREHEAT light should come on.
The READY light will come on when the water temperature has reached the preheat temperature.
Press the TIMER button to set the timer for the desired length of steaming time.
Press the START button. The STEAMING light will come on and the timer will begin to count down the Steaming period.
When the steaming time runs out the COOL DOWN light will come on and the timer will begin to count down to the Cool Down period.
When the Cool Down cycle is complete, a buzzer will sound. The clothes are now ready to be removed from the steamer.
Pressing any button will turn the buzzer off and return the steamer to the READY state.